Sehrish Memon, MD

Original Contribution

3D Printing of Renal Arteries for Endovascular Interventions: Feasibility, Utility, and Correlation With Renal Arteriograms

12/01/2021

Sanjog Kalra , MD;

Sean Janzer , MD;

Sehrish Memon , MD;

Evan Friend , BS, MD;

Jon C. George , MD, MBA;

Three-dimensional (3D) printing technology is increasingly being utilized for preprocedural planning of interventional procedures. However, utility of 3D models of obstructive and clinically relevant renal artery disease has not been...

Three-dimensional (3D) printing...

12/01/2021

Journal of Invasive Cardiology

Case Files by Dr. George

Utility of Laser Atherectomy in Complex Revascularization of Coronary Chronic Total Occlusion

10/06/2019

Jon C. George , MD, MBA;

Sanjog Kalra , MD;

Sean Janzer , MD;

Sehrish Memon , MD;

We describe a case of complex proximal RI and LCX CTOs in the same patient with a high J-CTO score. Use of hybrid algorithm led to successful crossing and revascularization with the utilization of laser atherectomy and imaging guidance.

We describe a case of complex...

10/06/2019

Cath Lab Digest

Case/Review

JCLI: Transcollateral Intra-Arterial Retrograde Ostial Superficial Femoral Artery Chronic Total Occlusion Recanalization for Critical Limb Ischemia

06/01/2021

Sehrish Memon , MD;

Sanjog Kalra , MD;

Sean Janzer , MD;

Jon C. George , MD, MBA;

We present a case of ostial superficial femoral artery CTO in a patient with CLI who underwent successful revascularization via TCIA strategy with a successful outcome.

We present a case of ostial...

06/01/2021

Cath Lab Digest

Case Report and Brief Review

Transcollateral Intra-Arterial Retrograde Ostial Superficial Femoral Artery Chronic Total Occlusion Recanalization for Critical Limb Ischemia

06/01/2021

Sehrish Memon , MD;

Sanjog Kalra , MD;

Sean Janzer , MD;

Jon C. George , MD, MBA;

We present a case of ostial superficial femoral artery CTO in a patient with CLI who underwent successful revascularization via TCIA strategy with a successful outcome.

We present a case of ostial...

06/01/2021

Case Files With Dr. George

Use of Re-entry Device to Recanalize Chronically Occluded and Thrombosed Inferior Vena Cava Filter in a Patient With Post-Thrombotic Syndrome

10/21/2019

Sehrish Memon , MD;

Jon C. George , MD, MBA;

A case of IVC thrombosis and chronic IVC filter occlusion.

A case of IVC thrombosis and...

10/21/2019

Vascular Disease Management

Original Contribution

Robotic Percutaneous Coronary Intervention During COVID-19 Pandemic: Outcomes and Cost-Effectiveness With Procedural Distancing

12/19/2021

Naveen N. Sooknanan , MD;

Jon C. George , MD, MBA;

Sehrish Memon , MD;

The COVID-19 pandemic raised many questions, including the need to maintain distancing and the importance of full personal protection equipment (PPE) for healthcare workers. Robotic-assisted percutaneous coronary intervention (R-PCI) can be...

The COVID-19 pandemic raised...

12/19/2021

Journal of Invasive Cardiology

Original Contribution

3D Printing for Mesenteric Artery Endovascular Interventions: Feasibility and Utility for Preprocedural Planning and Angiographic Correlation

05/06/2022

Sehrish Memon , MD;

Evan Friend , BS, MD;

Sanjog Kalra , MD;

Sean Janzer , MD;

Jon C. George , MD, MBA;

Three-dimensional (3D) printing of mesenteric artery (MA) anatomy preprocedurally for endovascular interventions can allow strategic preprocedure planning and improve procedure-related clinical outcomes. Three patients with computed...

Three-dimensional (3D) printing...

05/06/2022

Journal of Invasive Cardiology

Original Contribution

3D Printing of Subclavian Artery: Utility for Preprocedural Planning and Correlation With Subclavian Artery Percutaneous Vascular Interventions

06/01/2022

Sehrish Memon , MD;

Evan Friend , BS, MD;

Sanjog Kalra , MD;

Sean Janzer , MD;

Jon C. George , MD, MBA;

Three-dimensional (3D) printing for subclavian artery (SA) percutaneous vascular interventions (PVI) may allow superior understanding of patient specific complex anatomy and aid with preprocedural planning.

Three-dimensional (3D) printing...

06/01/2022

Journal of Invasive Cardiology

Original Contribution

Patient-Specific Coronary Artery Bypass Graft 3D Printing: Implications for Procedural Planning in Complex Percutaneous Coronary Interventions

08/01/2021

Jon C. George , MD, MBA;

Sanjog Kalra , MD;

Sehrish Memon , MD;

Sean Janzer , MD;

Evan Friend , BS, MD;

Solomon P. Samuel , PhD;

Igor Goykhman , DO;

3D printing of anatomically complex CABG patients has the potential to assist with preprocedural planning and operator understanding of complex coronary anatomy.

3D printing of anatomically...

08/01/2021

Journal of Invasive Cardiology

Original Contribution

3D Printing of Carotid Artery and Aortic Arch Anatomy: Implications for Preprocedural Planning and Carotid Stenting

09/01/2021

Jon C. George , MD, MBA;

Sehrish Memon , MD;

Evan Friend , BS, MD;

Sanjog Kalra , MD;

Solomon P. Samuel , PhD;

Sean Janzer , MD;

Igor Goykhman , DO;

Three-dimensional (3D) printing of aortic arch and carotid artery may aid with preprocedural planning and adaptive learning, possibly reducing procedure-related complications. Five CAS cases with available computed tomography angiography...

Three-dimensional (3D) printing...

09/01/2021

Journal of Invasive Cardiology